Premium Location in RSM
 
   Featured Property: Rancho Santa Margarita, CA


Click here to download and install the small web client needed to view the cameras at this location.

Follow these steps to install this camera web client:

1. Select open on the pop-up window that shows up when you click on the link above.
2. Once the installation starts just keep selecting next till the installation finishes.
3. Open Camras web client from Start > Programs > DigiOpG2 Web Agent or Desktop
4. Click on the Connect icon on the top left corner
5. If you are using it for the first time you will need to add connections.
6. To add a connection click on the Add button at the bottom left and enter the following values in the form:
server name: scuba
IP: 64.58.187.123
ID: scuba
password: scuba
Ch: 1-16
And click OK
7. To Add the second Camera follow steps 4 to 6 again but use the following info for the form
and enter the following values in the form:
server name: scuba
IP: 64.58.187.124
ID: scuba2
password: scuba
Ch: 1-16
And click OK

Viewing the Cameras

1. Start the cameras web client from Desktop OR Start > Programs > DigiOpG2 Web Agent
2. Click on the Connect icon on the top left corner and select the camera you want to connect to and click on the Connect Button.


 

click on a picture to enlarge
building


office
 
Copyright © 1996 - 2006 Scuba.com, LLC. All Rights Reserved